Products

Products
Products List
313-324 of 1660 results

ANGL MTL,EQ,S355J2,80x80x10mm

ANGL MTL,EQ,S355J2,80x80x10mm
HX-ANGLE STEEL
Angles, metallic
Type EQUAL
Mat STRUCTURAL STEEL
Mat, spec GRADE S355J2, EN10025-2
Dimensions LG 80 x WD 80 mm
Thickness 10 mm
Request a quote

ELB,90 LR,WPL6,S40,4in,SR,BW

ELB,90 LR,WPL6,S40,4in,SR,BW
HX-ELBOW
Butt-weld pipe elbows
Design spec ASME B16.9
Mat LOW TEMPERATURE CARBON STEEL
Mat spec, fitting ASTM A420 GRADE WPL6
Manufacturing process SEAMLESS
Service SOUR
Service requirement NACE MR 01-75
Angle 90°
Type LONG RADIUS
Schedule number S-40
Size 100 mm * 4 in
Request a quote

ASTM A36 STEEL SHEET IN COIL, THICKNESS 11.75mm

ASTM A36 STEEL SHEET IN COIL, THICKNESS 11.75mm
HX-COIL
ASTM A36 STEEL SHEET IN COIL, THICKNESS 11.75mm
Request a quote

SPACER,RNG, 6"RTJ, 2500, A387 GRADE 9 CL2

SPACER,RNG, 6"RTJ, 2500, A387 GRADE 9 CL2
HX-FLANGE
SPACER,RNG, 6"RTJ, 2500,  A387 GRADE 9 CL2
Request a quote

STUD, 3/4'' X 7'' , STEEL, HIGH TENSILE THREADED W/NUT ON BOTH ENDS

STUD, 3/4'' X 7'' , STEEL, HIGH TENSILE THREADED W/NUT ON BOTH ENDS
HX-BOLT
STUD, 3/4'' X 7'' , STEEL, HIGH TENSILE THREADED W/NUT ON BOTH ENDS
Request a quote

SHT/PLT,SOL MTLC,S355G8+, 10mm, 3000x1500m

SHT/PLT,SOL MTLC,S355G8+, 10mm, 3000x1500m
HX-PLATE

Production Process: Hot rolled, Cold rolled, Thermal mechanical control rolled (TMCP)

Steel Grade:S355

Delivery condition: As rolled, Normalized, Quenched & tempered, TMCP

Thickness:10mm

Width:1500mm

Length: 3000mm

Surface Treatment: Bare.

Delivery Time: Within 20-30days.

Request a quote

BAR,MTL,RND,25MM,6M,STL,PLN,ASTM A36

BAR,MTL,RND,25MM,6M,STL,PLN,ASTM A36
HX-BAR
BAR,MTL,RND,25MM,6M,STL,PLN,ASTM A36
Request a quote

Slip On (Flat Face), 5 Inch, l ASTM A105, ANSI #150

Slip On (Flat Face), 5 Inch, l ASTM A105, ANSI #150
HX-FLANGE
Slip On (Flat Face), 5 Inch, l ASTM A105, ANSI #150
Request a quote

PIPE,GR.6,160,3/4in,SR,PE,6000mm

PIPE,GR.6,160,3/4in,SR,PE,6000mm
HX-PIPE
PIPE,GR.6,160,3/4in,SR,PE,6000mm
Request a quote

ASTM A234 WPB SCH-40 , Reducing TEE, Size 10" × 10" × 1 1/2",BW

ASTM A234 WPB SCH-40 , Reducing TEE, Size 10" × 10" × 1 1/2",BW
HX-TEE
ASTM A234 WPB SCH-40 , Reducing TEE, Size 10" × 10" × 1 1/2",BW
Request a quote

Threaded Cap 1/2" 3000# NPTF ASTM A105N ASME B16.11

Threaded Cap 1/2" 3000# NPTF ASTM A105N ASME B16.11
HX-CAP
Threaded Cap 1/2" 3000# NPTF ASTM A105N ASME B16.11
Request a quote

Concentric Reducer 3" x 2", sch 80 x Sch 80, BW, ASTM A234 Gr. WPB, ASME B16.9

Concentric Reducer 3" x 2", sch 80 x Sch 80, BW, ASTM A234 Gr. WPB, ASME B16.9
HX-REDUCER
Concentric Reducer 3" x 2", sch 80 x Sch 80, BW, ASTM A234 Gr. WPB, ASME B16.9
Request a quote
Total 1660 Records, 12 records per page